Automatic Dosage:

The automatic, wall-mounted dosing system works accordingly to the Venturi principle: On opening the water tap, the water is added to the cleaning agent at low pressure via a separate hose. The quantity is defined by means of a measuring pin. The system is equipped with non-return valve, complying with DVGW (German Technical & Scientific Association for Gas & Water) so that contaminated water cannot flow back into the water supply

 

 

Automatic Filling:

To enable automatic filling, the hose is fixed to the scrubbing/vacuuming vendor by means of a plug-in coupling. When the clean water tank is completely filled, a float switch stops the water supply. The operator can complete other work during this time & need not remain by the machine. This supports a more efficient & economical deployment of personnel.   

 

On-Board Dosing System:

The system consists of a regulated pump. The addition of the cleaning agent occurs subject to the water supply. The concentration can be adjusted continuously & always remains constant. Over & under dosing are effectively prevented as a result, even when the operator increases or reduces the water supply. The system can also be used in machines without a water pump.

 

Fast Filling:

The Fast Fill filling system is particularly suited for use involving high water consumption or little time for the filling process. It consists of a 150 or 300 litre tank & is easy to handle. The fast filling occurs at 120 litres/minute. A dosing unit ensures an accurate mixture ratio of cleaning agent suitable for the dispenser.